Search found 116 matches

by Ben
Fri Aug 03, 2018 6:01 am
Forum: Thunder Laser Tech support
Topic: Honeycomb materials and cleaning
Replies: 2
Views: 97

Re: Honeycomb materials and cleaning

Hello, To answer your quesitons: 1.For the honeycomb table,it made from galvanized iron and yes the edges of honeycomb table made from aluminum. 2.To clean the plywood and acrylic residue,we generally use vacuum clean to remove them. you can refer to below link. http://support.epiloglaser.com/articl...
by Ben
Wed Aug 01, 2018 8:52 am
Forum: Thunder Laser Tech support
Topic: Rotary Attachment does not rotate - urgent !
Replies: 2
Views: 97

Re: Rotary Attachment does not rotate - urgent !

Hello Anda, Sorry for your problem. For the connection,see below. connection for rotary attachment.png Please check it first. Then connect the rotary with the machine,turn on the switch,please check if the power light is on on the rotary,see below. connection for the machine.jpg power light.png How ...
by Ben
Wed Jul 25, 2018 8:06 am
Forum: Thunder Laser Tech support
Topic: Replacement of 100w laser tube with 80w?
Replies: 1
Views: 153

Re: Replacement of 100w laser tube with 80w?

Hi Jim, It's ok if you want to replace the 100watt with an 80watt laser tube. They use the same power supply,you can keep the original power supply,no need to make any adjustment for power supply. Thunder laser machine have limited the max power as 70%,it's about 21~22mA on the meter for 80 and 100w...
by Ben
Thu Jul 12, 2018 3:39 pm
Forum: Thunder Laser Tech support
Topic: Test of 100w tube for power loss
Replies: 3
Views: 286

Re: Test of 100w tube for power loss

Hi Jame, OK. The new 100watt laser tube can cut 6mm acrylic at speed 18 and power 70%. I will ask my colleague to reply on skype for your need tomorrow,ok? For your last question,are you mention the reflective mirror,it's molybdenum mirrors.The molybdenum mirrors have a high reflectivity, moreover, ...
by Ben
Thu Jul 12, 2018 2:53 am
Forum: Thunder Laser Tech support
Topic: Test of 100w tube for power loss
Replies: 3
Views: 286

Re: Test of 100w tube for power loss

Hi James, This is Ben from Thunder laser. Sorry to hear that your laser tube is not working well now. Whenever there is a perceived loss of power, it could be caused by dirty or damaged optics, bad laser beam alignment or a focus or table level issue. Below you can find a document to instructions on...
by Ben
Mon Jun 25, 2018 6:11 am
Forum: Thunder Laser Tech support
Topic: Laser Tube Replacement
Replies: 1
Views: 207

Re: Laser Tube Replacement

Hi Steven,

You can replace with a RECI W4 100 watt tube for your machine.
But we don't use the RECI laser tube now,you should buy one by yourself.
by Ben
Mon Jun 25, 2018 6:05 am
Forum: Thunder Laser Tech support
Topic: standard laser head vs HR head
Replies: 1
Views: 245

Re: standard laser head vs HR head

Hi Anda,

I wonder if you use HR head to cut material.
Please noted,the HR head is generally used only for engraving,if you want to cut,you can only cut something very thin,like paper.
by Ben
Thu Jun 21, 2018 2:02 am
Forum: General Laser machine discussion
Topic: Control Mars 130 via network cable & switch
Replies: 3
Views: 335

Re: Control Mars 130 via network cable & switch

Hi Robbie,

To control machine via a wireless router,please see below.
by Ben
Thu Jun 21, 2018 1:50 am
Forum: Thunder Laser Tech support
Topic: Loss of Power!!!!
Replies: 3
Views: 394

Re: Loss of Power!!!!

Hi Steven, Do you check the Beam pattern for the laser tube? Please let me know if the laser tube outputs a circle(laser beam) but not a solid round which is bad? It's ok if you want replace with another brand of laser tube,but if it's co2 glass laser tube, its life is almost the same, it is about 2...
by Ben
Tue Jun 19, 2018 2:20 am
Forum: Thunder Laser Tech support
Topic: Loss of Power!!!!
Replies: 3
Views: 394

Re: Loss of Power!!!!

Hi Steven, It seems that the laser tube have loss of power. The ammeter have reading of 23,so the laser power supply should be fine. If the laser tube have lost power so much as you said,i'm afraid it became bad now. To check the laser tube,please check the Beam pattern of laser tube by laser a dot ...