Search found 11 matches

by Jasper_Rullman
Fri Dec 09, 2016 6:42 am
Forum: Thunder Laser Tech support
Topic: 3D engrave
Replies: 12
Views: 9310

Re: 3D engrave

Thank you for the information, I just wanted to be 100% clear, it is expected to have to have to Mirror any image to be used with the rotary table. Just surprised that is not documented in the RDWorks Manual.
by Jasper_Rullman
Wed Dec 07, 2016 12:16 am
Forum: Thunder Laser Tech support
Topic: 3D engrave
Replies: 12
Views: 9310

Re: 3D engrave

My settings are as you show in the image. Just to be clear though, I SHOULD NOT HAVE TO MIRROR my image when I use the rotary table? I should only have to rotate the image 90 degree to align with the Y axis?
by Jasper_Rullman
Mon Dec 05, 2016 5:50 am
Forum: Thunder Laser Tech support
Topic: 3D engrave
Replies: 12
Views: 9310

Re: 3D engrave

That is what I had told Yumiko, I rotated the image the 90 degrees to align with Y axis, but the image was reversed as in a mirror. There is no information in the manual saying that the image needs to be mirrored to do rotary etching or cutting. Not a problem if I have to do that but want to make su...
by Jasper_Rullman
Mon Dec 05, 2016 12:48 am
Forum: Thunder Laser Tech support
Topic: 3D engrave
Replies: 12
Views: 9310

Re: 3D engrave

Is that reverse or just rotate?
by Jasper_Rullman
Thu Dec 01, 2016 1:08 am
Forum: Thunder Laser Tech support
Topic: 3D engrave
Replies: 12
Views: 9310

Re: 3D engrave

I will have to get an image, but everything worked fine. Rotated image 90 degrees to orientate to object, size was good to the diameter, etc. But the image was reversed like in a mirror
by Jasper_Rullman
Wed Nov 30, 2016 1:20 am
Forum: Thunder Laser Tech support
Topic: 3D engrave
Replies: 12
Views: 9310

3D engrave

I am attempting to use my rotary table, first attempt my image was reversed, is this normal and I have to reverse image before engrave, or do I have a setting incorrect?
by Jasper_Rullman
Mon Sep 26, 2016 2:27 am
Forum: General Laser machine discussion
Topic: New Controller for Old Machine - Unable to Pulse Laser
Replies: 8
Views: 5156

Re: New Controller for Old Machine - Unable to Pulse Laser

Issue 1 -Please click this links to soluve you problem http://www.thunderlaser.com/troubleshooting/laser-cutters-lcd-panel-in-chinese-2.html If your laser cutter’s LCD panel is in Chinese,it might cost you lots of time to set to English.Now Thunder laser will show you how to change Chinese to Englis...
by Jasper_Rullman
Tue Sep 06, 2016 7:52 am
Forum: General Laser machine discussion
Topic: How to solve the failure of laser engraving and cutting in China ?
Replies: 8
Views: 6972

How to solve the failure of laser engraving and cutting in China ?

Hello. I'm really hoping someone can help me. A friend of mine brought a laser cutter and engraver off eBay from China. It worked for a few months then one day a tiny puff of smoke came out the main board and it stopped working. They eventually sent out a new board but it still didn't work. After mo...
by Jasper_Rullman
Wed Oct 21, 2015 2:46 am
Forum: Thunder Laser Tech support
Topic: Turn on fan/blower and air compressor?
Replies: 3
Views: 3918

Re: Turn on fan/blower and air compressor?

Hi Jasper This is Tom from thunder laser When you press start a job, the laser will turn on the fan and air compressor immediately The laser send a work signal to a mainboard(TL-Timer) to asking output power to exhaust fan and air compressor And when the job is finished, both device will be stopped...
by Jasper_Rullman
Wed Oct 21, 2015 1:17 am
Forum: Thunder Laser Tech support
Topic: Turn on fan/blower and air compressor?
Replies: 3
Views: 3918

Turn on fan/blower and air compressor?

How can I turn on the fan/blower and air compressor?
When I turn on the Mars130 laser no power is sent to the fan/blower and air compressor.

Thank You.