Search found 22 matches
- Mon Apr 23, 2018 9:11 am
- Forum: Thunder Laser Tech support
- Topic: Nova 63 - red dot pointer / xy axis/ water-oil separator
- Replies: 4
- Views: 3239
- Mon Apr 23, 2018 9:07 am
- Forum: Thunder Laser Tech support
- Topic: Nova 63 - red dot pointer / xy axis/ water-oil separator
- Replies: 4
- Views: 3239
Re: Nova 63 - red dot pointer / xy axis/ water-oil separator
Hi Ben. Low left corner Attached is the image that shows that the laser head goes beyond the low left corner of the flatbed. it goes to the metalic edge, does not stop where the honey comb ends. Top left corner On the other side, you can see on the second picture where are the burn marks on the hone...
- Mon Apr 23, 2018 7:18 am
- Forum: Thunder Laser Tech support
- Topic: Nova 63 - red dot pointer / xy axis/ water-oil separator
- Replies: 4
- Views: 3239
Nova 63 - red dot pointer / xy axis/ water-oil separator
Hello Ben I have identified at least 3 big problems with the machine. #1. There is no red dot pointer, it has never worked. I have attached pic to see that I cannot see any red dot pointer on the material that I am trying to cut. (pic red_dot_pointer.jpg) #2. The XY axis - the head does not go to th...
- Fri Apr 06, 2018 4:00 pm
- Forum: Thunder Laser Tech support
- Topic: Red dot pointer not showing on Nova 63
- Replies: 1
- Views: 1816
Red dot pointer not showing on Nova 63
Hi
The red dot pointer is supposed to be a standard feature. It has never worked. What should I do to enable it?
Thank you
Anda
The red dot pointer is supposed to be a standard feature. It has never worked. What should I do to enable it?
Thank you
Anda
- Thu Mar 22, 2018 9:49 pm
- Forum: Thunder Laser Tech support
- Topic: Pulse button
- Replies: 1
- Views: 2360
Pulse button
Hi Ben, I have to cut a cardboard only half of its thickness and I was playing around and get very good results using the pulse button. In few passes the cardboard was half cut and the cuts were extremely clean, no trace of burn at all. # Is it OK to use the pulse function for this type of job? ( I ...
- Tue Mar 20, 2018 12:28 pm
- Forum: Thunder Laser Tech support
- Topic: New air pump and electro valve
- Replies: 1
- Views: 2302
New air pump and electro valve
The Outstanding air compressor that came with the nova 63 machine a capacity of 60 liters /min and we need to purchase an electro valve. What should be the characteristics of the electro valve to accommodate efficiently the new air pump? The valve that we have already purchased is not good (1/4"...
- Mon Mar 12, 2018 9:14 am
- Forum: Thunder Laser Tech support
- Topic: double line in traced image
- Replies: 7
- Views: 10860
Re: double line in traced image
Hi Ben,
Which software do you suggest?
Does the double line have any impact on the time need to cut the design?
Thank you
Anda
Which software do you suggest?
Does the double line have any impact on the time need to cut the design?
Thank you
Anda
- Thu Mar 08, 2018 9:33 am
- Forum: Thunder Laser Tech support
- Topic: double line in traced image
- Replies: 7
- Views: 10860
Re: double line in traced image
Hi Ben I was observing the laser and when the file has double lines it fires twice the same path and it takes longer to cut the pattern. If instead of a double line is a single line the time to cut the same patter is less. Centreline is a middle line between the two lines and it replaces these lines...
- Tue Mar 06, 2018 7:31 am
- Forum: Thunder Laser Tech support
- Topic: double line in traced image
- Replies: 7
- Views: 10860
Re: double line in traced image
I trace the image in inkscape. Tx.
- Tue Mar 06, 2018 2:25 am
- Forum: Thunder Laser Tech support
- Topic: double line in traced image
- Replies: 7
- Views: 10860
double line in traced image
Hi
When I trace an image a double line is formed. What tool should I use to centerline ? Does the double line affect in any way the path of the laser beam?
Thank you
When I trace an image a double line is formed. What tool should I use to centerline ? Does the double line affect in any way the path of the laser beam?
Thank you