Laser Engraver Forum

Dear friend, Please help to improve your user profile so we can check your machine information and save our time to judge and solve the problem. Machine info , please write down both the machine model and the machine serial numbe r as below: 1.png Where are they ,see below. 3.jpg 2.png Thanks for yo...

Hi Maxim, To tell you more details about the difference of Class 1 machine. Class 1 laser machine will perform as following： 1.Generally the laser be placed into AUTO mode. 1.png Then a closed safety system is integrated which immediately switches off the power to the laser tube and all axis drivers...

Hi Jon, This is Ben from Thunderlaser. About your problem, 1.the setting for software is alright. setting for rotary attachment.png Select “Output”, and then tick“Enable rotate engrave” ① The Circle pulse is set to 16000 （Please set circle pulse to 7601 while your machine is bought before February 2...

Hi Salmagundi,

There are two ways can meet your need.
1.Copy and paste,then how to move onto the original,below tools will help you. 2.Enable feeding,only change the value of the "Count",then the whole files will perform as you set.

Hi ALX, Sorry to hear that your machine is not working well. From your description,and yes,it seems be to the mechanical problem with the Y aixs. Both sides belt tension are ok for Y,but noise close to the Y motor.please have a look to the below link. I think that maybe the belt of Y motor that beco...

Hi Stefan, Sorry for my late reply. I have tested in our NOVA35-80watt machine. It will happen when the power is much higher or the interval is much bigger. For X-unilateralism,500mm/s,25 power and interval 0.08 can engrave good on plywood. If you have more power,the wood will produce more wood chip...

Hi Stefan,

Since the Y axis direction have two rails,it can be more fixed while engraving with Y-swing.
I'd like to know how is the result of X-unilaterism,thanks.

Hi Tumim,

I'm not sure what you want,it would be better to show me some pictures,thanks.

Hi Tumim, Yes,you can press "origin" to set the start point according to the red dot indicator,and press "Frame" to confirm the processing area,so you can cut it right. cutting two pieces in a time cannot get a better result,there will be much burnt between two pieces and easy to...

Hi Steven, There is a solution for you. You can use the laser through mode,set the Open Delay,then the machine will laser on the Through power during the Open Delay time without laser head movement. laser head will move with the working power until the Open Delay time is up. Set back the TL-timer to...