Page 1 of 1

Rotary laser machine

Posted: Wed Mar 01, 2017 9:16 am
by jonko
Hey guys,

I need your input. Want to build a CNC laser for ablating paint on metal pipes. It would be used only for that purpose.
The pipes are of diameters from 250mm to 600mm. Their length is from 100 to 350mm. And weight from 0.5kg to 5kg
Ablating paint like shown here.
Here's a basic drawing of the idea for the machine:

Image

First of all, would this solution work?
Then, any advices or guides would be highly appreciated!

Re: Rotary laser machine

Posted: Thu Mar 02, 2017 12:49 am
by LINUS
Your idea may be right,but you should use Rotary Axis

Re: Rotary laser machine

Posted: Thu Mar 02, 2017 8:16 am
by jonko
You mean rotary table or the solution with a lathe chuck?
Chuck would have to be extremely large and heavy (600mm diameter).

Re: Rotary laser machine

Posted: Thu Mar 02, 2017 9:36 am
by LINUS
A lathe chuck?The speed of the laser machine may be regulated to pace the lathe chuck

Re: Rotary laser machine

Posted: Sun Jun 04, 2017 11:16 am
by Michael Lin
Well, this our solution:
QQ截图20170604191334.jpg
QQ截图20170604191334.jpg (587.25 KiB) Viewed 2791 times