need help
Moderator: baker
-
- Posts: 2
- Joined: Fri Mar 10, 2017 8:17 am
need help
Hi everyone anyone? I have recently purchased a second hand 80w co2 laser i can burn things if i hold infront of the tube but not through the head maybe mirror alignment question should i see the laser beam right to the end of the glass tube as it stops at the mental ring and doesnt travel through the last part of the glass tube is this normal im a newbie please help i can post pictures/videos if required thanks from the uk
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: need help
phpBB [media]
There is a video tell you How to adjust the laser beam path
-
- Posts: 2
- Joined: Fri Mar 10, 2017 8:17 am
Re: need help
Hi thanks for that i now have the beam cutting but only cardboard it will not cut through 3mm perspex/wood it only burns into it it is an 80w tube too i have taken the head apart should there be a a likr magnification lense in there as all what is inside is an angled mirror then a concave lense and a retaining threaded ring looks to me as if there should be more inside it due to how much the ring screws inside I know it has quite a few swirly scratches would this effect it massively thank you
-
- Posts: 1
- Joined: Mon May 08, 2017 12:03 am
Реально заработать, ну точно не напрягаясь.
В среднем, за просмотр видео на этом сервисе, платят 100 рублей.
Обязательно просмотри этом. Через пару недель ощутишь себя другим человеком.
Обязательно просмотри этом. Через пару недель ощутишь себя другим человеком.
[url=http://tinyurl.com/9000RubNow]Заработай на просмотре видео[/url]