Big gap Engraving
Moderator: baker
Big gap Engraving
Hello ,maybe somebody knows why this happens? When raster engraving ,lines are not straight they are curved in both sides if you look close.. it's when i use gap 0.5mm and speed 150mm/sec for striped look.. or it's normal? Not a big problem ,just wanna know maybe i can get straght lines..
- Attachments
-
- 20170325_154943.jpg (607.24 KiB) Viewed 2603 times
-
- 20170325_155221.jpg (595.85 KiB) Viewed 2603 times
Re: Big gap Engraving
Hi KZX,
This is Ben from Thunder laser.
Regarding your problem,my answer as below.
1.The lines are not staight but curved.
In the scan mode of X_swing,there is a shake range from belt and motor while engraving speed under 400mm/sec and less.
how to fix it,you just run on 500mm/sec and more,it's not necessary to work on low speed if it can run fast.
The Max speed is 1000mm/s,please just set speed as 500,600,700 and so on.
or you can select scan mode as X_unilateralism,in that mode,it will process slow but will make a better result at whatever speed you set.
2.The edge is not smooth.
For X-Swing, there is a deviation and gap due to the belt driver as following shown: you can adjust the Reversal interval for scanning.(Each machine have factory defaults but it's not perfect for a single machine).
and you can test the perfect value for it by yourself. In general, more speed need more reversal interval.
where is it, see pic below: there is a parameter of it for your reference,see attachment.
This is Ben from Thunder laser.
Regarding your problem,my answer as below.
1.The lines are not staight but curved.
In the scan mode of X_swing,there is a shake range from belt and motor while engraving speed under 400mm/sec and less.
how to fix it,you just run on 500mm/sec and more,it's not necessary to work on low speed if it can run fast.
The Max speed is 1000mm/s,please just set speed as 500,600,700 and so on.
or you can select scan mode as X_unilateralism,in that mode,it will process slow but will make a better result at whatever speed you set.
2.The edge is not smooth.
For X-Swing, there is a deviation and gap due to the belt driver as following shown: you can adjust the Reversal interval for scanning.(Each machine have factory defaults but it's not perfect for a single machine).
and you can test the perfect value for it by yourself. In general, more speed need more reversal interval.
where is it, see pic below: there is a parameter of it for your reference,see attachment.
- Attachments
-
- parameter.png (2.06 KiB) Viewed 2588 times
-
- Reverse interval for X-Swing.png (285.79 KiB) Viewed 2588 times
Re: Big gap Engraving
Thanks Ben ,great answer! i always like learn something new!
Играл в Lineage 2? Заходи на Moon-Land
Слыхали когда-нибудь о MMORPG онлайн-игре lineage 2? Хроники Interlude?
Если вы уже фанат этой игры, тогда быстрей заходите на проект moon-land.net ! Ну а если вы еще не играли в La2, но хотите попробовать - тогда тоже переходите!
Interlude PvP сервер lineage 2
lineage eternal
скачать клиент lineage 2 interlude
lineage 2 interlude сервера
lineage ru
скачать lineage 2 Interlude
На нашем сайте можно скачать клиент Lineage 2 Interlude и патч для входа в игру.
Наш сервер Линейдж 2 PvP с дополнениями, что дает волю новым ощущениям. заходите к нам.
Если вы уже фанат этой игры, тогда быстрей заходите на проект moon-land.net ! Ну а если вы еще не играли в La2, но хотите попробовать - тогда тоже переходите!
Interlude PvP сервер lineage 2
lineage eternal
скачать клиент lineage 2 interlude
lineage 2 interlude сервера
lineage ru
скачать lineage 2 Interlude
На нашем сайте можно скачать клиент Lineage 2 Interlude и патч для входа в игру.
Наш сервер Линейдж 2 PvP с дополнениями, что дает волю новым ощущениям. заходите к нам.