RDworks Output Ports - Wind Ouput - I/O Outputs

[Bionic-Bean]

Hi Guys,
Just connected the 'Wind' connection of the control panel main board to a solenoid in order to turn the air assist on and off - Works perfect.
BUT unable to control the other two outputs "OUT 1 and OUT 2 ". These two outputs do turn on when the machine is in operation - laser output and turns off at the end of program. so the outputs work.
Question :- is there a way to turn OUT1 and OUT2 on and off from the RDWorks software like the 'WIND' output. Within RDworks under CUT - Advanced option there are four selectable I/Os ( Extend I/O output IO1 IO2 IO3 IO4 ) how can I use these.

Any Information much appreciated.
Dave'O