Welcome to laserengraverforum.com!

Cutting Ready Made T-Shirts

Discuss laser machine here freely.

Moderator: baker

tosh60
Posts: 2
Joined: Wed May 10, 2017 7:26 am

Cutting Ready Made T-Shirts

Postby tosh60 » Wed May 10, 2017 2:54 pm

Hi
I have a laser machine I am trying to cut ready made T-shirt
The material is cotton. I am having trouble cutting straight through without burning the material.
What is the correct setting for 100w Reci laser, Power and speed. I have the RDWorksV8. Please see attached images.
I have checked the work table it is level, the mirrors are clean. The laser is 6mm above material.

The Laser Machine is RDJ1290 Laser Machine by Jinan Rongding
Attachments
IMG_0447.JPG
IMG_0447.JPG (992.92 KiB) Viewed 926 times
IMG_0446.JPG
IMG_0446.JPG (562.67 KiB) Viewed 926 times
IMG_0445.JPG
IMG_0445.JPG (594.07 KiB) Viewed 926 times

MobyKn
Posts: 4
Joined: Thu Feb 16, 2017 5:54 pm

Re: Cutting Ready Made T-Shirts

Postby MobyKn » Thu May 11, 2017 1:12 am

You will then need to cutting out one or two records to check the setting. Based on my experience you can use 20%power 40mm/s speed.And you need a hight-power exhaust fan adsorbent the fabric.

tosh60
Posts: 2
Joined: Wed May 10, 2017 7:26 am

Re: Cutting Ready Made T-Shirts

Postby tosh60 » Fri May 12, 2017 8:56 am

Thank you for your reply. I did not understand message please resend.

Charleser
Posts: 8
Joined: Wed Sep 28, 2016 9:01 pm

Re: Cutting Ready Made T-Shirts

Postby Charleser » Fri May 12, 2017 1:59 pm

What setting did you use?Cut fabric that is so easy for 100watt.
And you have check the laser beam path?

harry56
Posts: 4
Joined: Mon Jun 12, 2017 5:44 am

Re: Cutting Ready Made T-Shirts

Postby harry56 » Mon Jun 12, 2017 7:57 am

I think the fuse blew as your machine



gclub


Return to “General Laser machine discussion”

Who is online

Users browsing this forum: Baidu [Spider] and 1 guest