Distortion in cutting

Discuss laser machine here freely.

Moderator: baker

Post Reply
User avatar
KzX
Posts: 10
Joined: Wed Mar 08, 2017 10:51 am

Distortion in cutting

Post by KzX »

I have experiancing problems when cutting different shapes. Lines seems to be distorted and not smooth.

Tested it with bouth my lasers 60w and 100w, pattern is the same on same symbols, so i belive mechanical side is not the problem, maybe the problem is in software?

Maybe someone have experianced similar problem and know the solution.

Thanks in advance.
Attachments
sample 2
sample 2
29405283_1725466714187546_1203663942_o.jpg (56.58 KiB) Viewed 2227 times
sample of small digits
sample of small digits
28946487_1725464010854483_1863198255_o.jpg (70.29 KiB) Viewed 2227 times
User avatar
KzX
Posts: 10
Joined: Wed Mar 08, 2017 10:51 am

Re: Distortion in cutting

Post by KzX »

Still having this problem.. Anybody can help maybe? :?
cnc_freak
Posts: 3
Joined: Thu Aug 02, 2018 7:28 am

Re: Distortion in cutting

Post by cnc_freak »

Its a problem of head movement. If you reduce the speed, it will be better.
You have to adjust the acceleration of the axis, in the system settings.
User avatar
KzX
Posts: 10
Joined: Wed Mar 08, 2017 10:51 am

Re: Distortion in cutting

Post by KzX »

I was experimenting with acceleration but no changes, if i reduce the speed to 10mm/sec the line is smooth but it's way too slow.. when machine was new i get great results with 30mm/sec and faster.. i check everything on machine and all seems to be rigid.. Don't know what else too try.. :(

Here are my settings for X and Y axis..
Attachments
Vendor settings yo.jpg
Vendor settings yo.jpg (183.21 KiB) Viewed 1504 times
cnc_freak
Posts: 3
Joined: Thu Aug 02, 2018 7:28 am

Re: Distortion in cutting

Post by cnc_freak »

You have to experiment with the user parameters, not with vendor.
Attachments
user_param.JPG
user_param.JPG (49.08 KiB) Viewed 1491 times
Post Reply