Some customer buy the laser cutting machine for cutting acrylic,maybe they have the problems for how to reduce burn markers on acrylic.
[url]Hitec cnc[www.hiteccnc.com] enginners give you some advise:
Burn marks are an inherent part of the laser cutting process – we are cutting things with a highly focused beam of fire after all. There are some tricks to minimizing this issue for different materials, and this post deals with acrylic.
Most of the acrylic sheets we use come with protective paper on both sides. It’s possible for us to leave this paper on when making your design, which we tend to do where it will not interfere with your engraving. The main downside to this is needing to peel paper off both sides of the acrylic, which can be time consuming and tricky if your design is intricate.
Generally our rule is: cut with paper on both sides if there is no raster engraving in the design, or if all raster engraving is of the heavy variety. Heavy raster engraving burns through the paper without any trouble, as does heavy and medium vector engraving. If the file has medium or light raster engraving, however, we will remove the protective paper from the top of the material unless otherwise requested.
It is possible to use medium engraving through the paper, but due to the dot matrix nature of the raster engraving not all the paper is burned away. A slightly sticky residue may be left on the plastic if you ask for this option – which may need to be cleaned off before you use it.
Below are some typical examples of what you get when laser cutting acrylic. It should be noted that it is most obvious on black hence using it as the example material. Also the images have been zoomed in to great detail and emphasizes the effects more than might be obvious to the naked eye.
Cutting – Paper Left On vs Paper Removed:
On the left through the paper and on the right without paper. The right shows a clear example of the smudgy burn marks that are left on the acrylic after cutting. Clearly the shapes cut through the paper is cleaner than not.
Heavy Raster Engraving – Paper Left On vs Paper Removed:
On the left through the paper and on the right without paper. You can see that engraving through the paper produces a crisper result. The vaporized acrylic builds up around the outside of the letters when the paper is not use and produces this slightly ‘inflated’ look. This would probably polish off should you have the desire to do so.
Discuss laser machine here freely.
1 post • Page 1 of 1