unknown model and manufacturer, please help me
Posted: Fri Oct 12, 2018 12:30 pm
Ηello to all, a laser cutter was found in my hands and I'm trying to make it work.
I changed the stepper control because there was a problem, now the motor working but one of the two motors when I choose to move manually does spasmodic movements right-left i chanche the step controler and have the same crazy movements , and the lasers do not light up, laser dont have problem i test it with the power from adapter from litlle cooler and work . The circuit have 2 dip switch have you know why it is there ? I have no instructions and I try use the program Benbox with nano firmware install , may not be compatible with benbox and for that reason the motor and the lasers do not work properly;
Thank you and sorry for my english
I changed the stepper control because there was a problem, now the motor working but one of the two motors when I choose to move manually does spasmodic movements right-left i chanche the step controler and have the same crazy movements , and the lasers do not light up, laser dont have problem i test it with the power from adapter from litlle cooler and work . The circuit have 2 dip switch have you know why it is there ? I have no instructions and I try use the program Benbox with nano firmware install , may not be compatible with benbox and for that reason the motor and the lasers do not work properly;
Thank you and sorry for my english