Page 1 of 1

NEJE master engraver 7 and 20w.

Posted: Wed Jan 15, 2020 11:58 am
by Mark101
Good day to all and a belated HAPPY NEW YEAR.

We have a NEJE master engraver with 7w and 20w modules.

Cutting area is reasonable small at 150mm x 150mm.

I would like to make it bigger, does anyone know where I could but bigger X Y rails??

Cheers

Mark.

Re: NEJE master engraver 7 and 20w.

Posted: Wed Jan 15, 2020 3:09 pm
by RKNAPPETT
How are you getting on with neje master software?
I have a 7w kkmoon laser an I can’t get it to cut an engrave with Inkscape . I’ve tried other software but it will not connect . I am hoping you may have a solution.

Many thanks

Re: NEJE master engraver 7 and 20w.

Posted: Fri Feb 28, 2020 5:50 pm
by Mark101
Hi.
I can't get in with inkscape either.
I use LibreCAD for the designing bit and the NEJE software to print.
I'm not sure if that helps in any way but I thought I'd pass it on to you.

Re: NEJE master engraver 7 and 20w.

Posted: Wed Apr 29, 2020 9:24 am
by FREEDDAWG
You can lay the tiles with engraving on the floor, it will be a wonderful element of home decor, the tile consists of natural stone with engraving. A wide selection of engraved tiles can be found here https://polarengraving.com/. If you want an engraved array or panel, also known as a mosaic display, which can consist of your own drawing and inscriptions in any language, engraved on several bricks or tiles. When manufacturing tiles using exclusive technology using a combination of old and new methods, using sandblasting and laser technology, our engraving is preserved for life.

Re: NEJE master engraver 7 and 20w.

Posted: Tue May 12, 2020 10:09 am
by segal
ortur laser 7w machine(neje ortur is almost the same )
does not turn on .The red LED is lit but does nothing else.
What could be the problem?