Damaged a controller board but don't know which

Discuss laser machine here freely.

Moderator: baker

Post Reply
JangoFett140
Posts: 2
Joined: Wed Jun 24, 2020 1:26 am

Damaged a controller board but don't know which

Post by JangoFett140 »

In doing maintenance and bleeding my loop I accidentally crossed the wires tapping the 5v for my fan controller and seem to have damaged one of the boards. The meter is now blank and i can’t adjust the power output but the test fire works. K40 whisper can connect to the controller board and move the laser around fine. Not sure if i need a new power supply digital controller board, if the power supply is whats damaged or if it is an issue with the main controller board.
Attachments
1C9950B3-A7C4-411F-8694-F278357E32C1.jpeg
1C9950B3-A7C4-411F-8694-F278357E32C1.jpeg (113.47 KiB) Viewed 1163 times
Post Reply