laser engraving machine

Discuss laser machine here freely.

Moderator: baker

Post Reply
Craig Weiner
Posts: 11
Joined: Tue Apr 21, 2020 3:54 pm

laser engraving machine

Post by Craig Weiner » Mon Aug 31, 2020 4:09 pm

The laser engraving machine is based on the numerical machine sensor technologies. First, you need to have a laser engraving file required, then open the file via laser engraving software, and start CNC programming, the laser engraver machine will start operating after the control system has obtained the instructions. The laser beam is reflected through laser mirrors, down the laser focal point through the laser lens, where the heat is most intense. And the laser beam begins to impinge on the material, the material burns or evaporates, and the color changes as well, creating a comparison. A complete laser engraving project will be graven after a while.

janta7788
Posts: 9
Joined: Thu Sep 10, 2020 9:51 am

Re: laser engraving machine

Post by janta7788 » Wed Sep 30, 2020 3:51 am

เล่นเกมแล้วได้เงิน สล็อตออนไลน์ live 22 เล่นง่ายๆ เล่นสล็อต ฟรีเครดิต
ได้เงินจริง เล่นเลยที่นี่ คลิกเลย เกมยิงปลา อย่าพลาดมาลุ้นกันเลย pgslot https://www.slot2xl.com/live22

Post Reply