picture engrave only lines

Discuss laser machine here freely.

Moderator: baker

Post Reply
Geraldet
Posts: 10
Joined: Wed Jul 15, 2015 8:11 pm

picture engrave only lines

Post by Geraldet »

hi
i tryd to engrave a picture ,but the laser only engraves horizontal lines ?
it dousnt even look like a picture ?

i use lasercut 5.3
tube 180W
picture from photograv
changed W/scan gap/filled/speed.

picture of result attached

who has an idea ?
User avatar
LINUS
Webmaster
Posts: 263
Joined: Tue Apr 28, 2015 3:55 am

Re: picture engrave only lines

Post by LINUS »

Have you ever heard about rasters?
Because of major,be at ease so.
User avatar
Lester Lio
Posts: 14
Joined: Wed May 20, 2015 1:16 am

Re: picture engrave only lines

Post by Lester Lio »

post the image you are trying to etch.
Geraldet
Posts: 10
Joined: Wed Jul 15, 2015 8:11 pm

Re: picture engrave only lines

Post by Geraldet »

i found the problem
it was the red high power cable what was touching the blue wire
many strange things happened with the laser ,like a poltergeist

now its working ok.
only engrave on glass is still not ok
tryd wet paper ,low dpi on wood its ok.
Post Reply