Laser 150 W RECI laser tube, monster!!!!

Discuss laser machine here freely.

Moderator: baker

Post Reply
Williamhaxy
Posts: 5
Joined: Mon Jul 20, 2015 3:48 pm

Laser 150 W RECI laser tube, monster!!!!

Post by Williamhaxy »

Last april I received a new 150W Recilaser tube machine from Zhongtai, i have one of 80W with 5 years of work also from Zhongtai, but have a lot of work and decided to buy this monster!!!
The laser tube comes with a 7 month warranty, its only 1.80 cmts length.
I'm cutting 20mm acrylic at 1.5mm/sec, but the best of this machine is when you cut 3mm to 5mm acrylic or mdf, it looks like cutting paper, up to 50mm / sec.
With the old machine i needed 9 hours to finish the jobs , now i'm using the machine only two and half hours to do the same job.
The machine is a 125 x 90 table, use a touch panel and the new software doesn't use a dogsoft.it works under corel 12.
The only complaint is about engraving, i cant make it go faster than 400mm/sec, but it engraves really deeeeeeeeeeep in one pass...!
If anyone needs more info about this machine, i'll be posting some pics, and jobs....
Luis
Post Reply