Installation of Rotary on TS6040 Laser Cutter & Engraving Machine

Discuss laser machine here freely.

Moderator: baker

Post Reply
MatthewOl
Posts: 7
Joined: Wed Aug 05, 2015 10:11 am

Installation of Rotary on TS6040 Laser Cutter & Engraving Machine

Post by MatthewOl »

I have yet another problem. My chinese contacts are not coming back to me. I have now mastered most of the areas of my laser cutter and engraver but now stuck with getting the rotary attachment to work. I have a TS6040 60w machine. I was given a step-by-step of how to install the rotary and change the pulse on the worktable. However, after one of the steps it says to push the "rim" button. My machine doesn't have a "rim" button. Also, we can get the rotary to turn, but it's asif it is turning to fast. I really want to get my business of the ground but can't advertise if I don't know how to do everything. If there's someone out there that can help me and guide me better on how to get the rotary working I would really appreciate your advise. I need a step by step. Using Lasercut 5.3 software.
Attachments
60.gif
60.gif (7.76 KiB) Viewed 1740 times
Post Reply