Good evening
In RDworks, how to cut a segment into two.
thank you of your responses.
Christian
RDworks
Moderator: baker
-
- Posts: 115
- Joined: Fri Jun 05, 2015 8:16 am
Re: RDworks
Hi Christian
This is Tom from thunder laser
Hope my answer will be useful for you
I am no sure what you really want to know according to your descriptions
1. if you want to copy a graphics to two and then cut it, please selects the graphics, and use the matrix copy option(it is placed at the left-down on the software), then input the value
2. if you want to repeat cut a graphics(segment) to two, just selects output option(it is placed at the up-right on the software) and tick "Enable feeding"
and input 2 into the "Feeding" function, then download your file into the laser.
If above are wrong, it's not what you want, please explain it more details, it will be help. thanks
Regards
Tom
This is Tom from thunder laser
Hope my answer will be useful for you
I am no sure what you really want to know according to your descriptions
1. if you want to copy a graphics to two and then cut it, please selects the graphics, and use the matrix copy option(it is placed at the left-down on the software), then input the value
2. if you want to repeat cut a graphics(segment) to two, just selects output option(it is placed at the up-right on the software) and tick "Enable feeding"
and input 2 into the "Feeding" function, then download your file into the laser.
If above are wrong, it's not what you want, please explain it more details, it will be help. thanks
Regards
Tom