Help for k40 laser engraver/cutter

Discuss laser machine here freely.

Moderator: baker

Post Reply
Posts: 4
Joined: Mon Oct 26, 2015 4:56 pm

Help for k40 laser engraver/cutter

Post by NEUPLENOEVEMI » Thu Nov 05, 2015 3:36 am


I am new in this engraving hobby and need a lot of help.
i started the engraving, but, after 10-20 seconds it is fading.

Please, see picture

also, what are the steps for engraving and cutting at the same time?
Step by step instructions please, since this is my first time.

Similar Threads:
Laser cutter/engraver
Laser Cutter/Engraver
Why buy a Laser cutter when you can modify a laser engraver.

Attached Thumbnails
11.png (64.58 KiB) Viewed 9065 times

Posts: 3
Joined: Fri Oct 30, 2015 4:16 am

Re: Help for k40 laser engraver/cutter

Post by Fbtbbhxep » Thu Nov 05, 2015 3:47 am

Hello, you are new in this engraving hobby, you should ask your supplier for help, I think you can get good after sales service.

Posts: 4
Joined: Mon Nov 02, 2015 10:15 pm

Re: Help for k40 laser engraver/cutter

Post by Zfoebnhyk » Thu Nov 05, 2015 3:59 am

Hello!You should learn more about how to use the laser machine.Perhaps you could find many videos on youtube, but I am not sure whether it can help you.Good luck to you.

Post Reply