RDWorks8 Laser Frequency setting

Discuss laser machine here freely.

Moderator: baker

Post Reply
richtruelove
Posts: 5
Joined: Thu Oct 15, 2015 1:20 pm

RDWorks8 Laser Frequency setting

Post by richtruelove »

Hello,
In the layer parameter settings there is an "advanced" setting button. When pressed it opens a window
Laser Frequency Setting.png
Laser Frequency Setting.png (48.11 KiB) Viewed 3431 times
and there is the possibility to select and adjust the laser frequency. There is no mention of this in the RDWorks8 user manual. Does this adjust the frequency of the laser pulse and what are the limits?

Richard Truelove
CanuckGal
Posts: 2
Joined: Tue Nov 10, 2015 4:47 am

Re: RDWorks8 Laser Frequency setting

Post by CanuckGal »

Yes I am curious about this too.
Thunder laser - Tom
Posts: 115
Joined: Fri Jun 05, 2015 8:16 am

Re: RDWorks8 Laser Frequency setting

Post by Thunder laser - Tom »

Hi All
Yeah, you can set a different the laser frequency for different material, but it makes not sense for China's glass tube, it is for RF metal laser tube.
If your laser tube is installed a RF all metal laser tube, you can input from 3K to 40K for it with different materials

Regards

Tom
richtruelove
Posts: 5
Joined: Thu Oct 15, 2015 1:20 pm

Re: RDWorks8 Laser Frequency setting

Post by richtruelove »

Tom,
Thank you for your reply. So as I understand, the laser frequency parameter has no effect on the glass laser tubes, only for the RF metal tubes.


Richard
Post Reply