Laser cutting ends dont exactly meet in the same line

Discuss laser machine here freely.

Moderator: baker

Post Reply
kacaedos
Posts: 1
Joined: Fri Sep 18, 2015 12:02 am
Contact:

Laser cutting ends dont exactly meet in the same line

Post by kacaedos »

Hi guys,

I have checked all slack, pulleys, belts etc, but i still cant get laser cuts start and finish to meet in the same line.

I was wanting to know if this is a mechanical issue or software settings issue.

Similar Threads:
why the laser not line up (cutting original point does not meet end point)
manufacturer of laser engraving,laser cutting machine
Cutting outside the line! :? :?
Danieloi
Posts: 3
Joined: Wed Sep 16, 2015 11:38 am

Re: Laser cutting ends dont exactly meet in the same line

Post by Danieloi »

As far as I am concerned,you can ask your supplier for help .
RedisBivy
Posts: 4
Joined: Sat Sep 19, 2015 4:17 am

Re: Laser cutting ends dont exactly meet in the same line

Post by RedisBivy »

It is also possibly an optical alignment issue. If the beam is off center enough, it will change position as it moves further away from the 2nd mirror. :shock:
Post Reply