Is it possible to cut Plywood with a CO2 laser?

Discuss laser machine here freely.

Moderator: baker

Post Reply
Harveyhymn
Posts: 4
Joined: Wed Sep 02, 2015 9:14 pm

Is it possible to cut Plywood with a CO2 laser?

Post by Harveyhymn »

I have a 150W laser cutter and somebody has asked me if it was capable of cutting plywood. What are your experiences with laser cutting machines and plywood? Is is possible or is it a no-go? What power is needed for which thickness?

Similar Threads:
laser cutting plywood
80W Laser 3/4" Plywood cutting speed
What laser to cut 1/8 inch plywood?
Holger
Terencerem
Posts: 5
Joined: Mon Oct 12, 2015 9:52 am

Re: Is it possible to cut Plywood with a CO2 laser?

Post by Terencerem »

Not that this is going to help much. But, I have a 40w laser and am cutting up to 1/4" plywood in one pass. It requires full power and a very slow speed. Plywood is a little difficult for my machine as it depends on how much of the bonding agent is used in the construction of the plywood. But, yes, you can cut plywood.
Post Reply