I do not have a laser cutter. But I was wondering if anyone has used their cutter to cut craft foam? This stuff... Craft Foam
Is it easy and fast to cut, a pain in the behind? Thanks in advance for any information!
Rick
Similar Threads:
Laser cutting eva foam
Need Help!- Laser recommendation for cutting foam
Craft Cutting 1/8" - 3mm Board
Newbie- Cutting XPS foam with cheap laser?
Laser Cutting Foam
Laser cutting craft foam, have you done it?
Moderator: baker
-
- Posts: 3
- Joined: Sat Jul 25, 2015 10:55 am
Re: Laser cutting craft foam, have you done it?
EVA foam (Foamies) cuts quickly and easily, but as with other thermoplastics it will melt so shapes may not retain sharp corners or small detail.
It is not as bad as expanded foams though and you can get very acceptable results.
Depending on the application I either de-focus slightly (above the material) or use 2-passes at lower power to produce better results.
It is not as bad as expanded foams though and you can get very acceptable results.
Depending on the application I either de-focus slightly (above the material) or use 2-passes at lower power to produce better results.