Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Discuss laser machine here freely.

Moderator: baker

Post Reply
Lonestarlaserco
Posts: 13
Joined: Thu Jul 21, 2016 5:11 pm

Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Post by Lonestarlaserco »

We have been having an issue with our machine as it keeps turning off after a cut. We installed a new power receptacle and it worked for 2 weeks. Now we cannot get any power to the machine. The cord is good and everything is hooked up properly. What are the steps we should take to resolve these issues? Fuse is not blown. We have replaced and rewired to the plug still nothing.
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Post by Ben »

Hi Lonestarlaserco
If you can turn on the machine,but no laser come out from the tube, right?
If yeah,Click TEST red button on the laser power supply
(please unplug that the signal port from the laser supply, see that the attached picture to know where is the signal part)
, and check if there is a laser beam from laser tube(let other one to open the cover of laser tube to check)
and tell if there is laser come out from the tube?
Attachments
picture1.png
picture1.png (439.64 KiB) Viewed 3571 times
Lonestarlaserco
Posts: 13
Joined: Thu Jul 21, 2016 5:11 pm

Re: Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Post by Lonestarlaserco »

Yeah we are having an issue I think where nothing is coming on. Its like something is bad in the wiring from the power receptacle to the power supply. Power Supply is good its like its having issues in the wiring which doesnt make sense as it has been checked and everything looks fine.
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Post by Ben »

Hi Lonestarlaserco
i wondering if the laser power supply is working fine,but the there are not laser come out from tube even if press the test button on laser power supply
while unplug the signal socket. right?
if yeah,as my experience,the laser tube is dead already.
looking forward to hear from you.
Lonestarlaserco
Posts: 13
Joined: Thu Jul 21, 2016 5:11 pm

Re: Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Post by Lonestarlaserco »

There is no power to the power supply and no lights are on.

We have had trouble with the fuses in the power cord but we have replaced them and still no power.

Can we skype sometime tonight I will stay up late....like my time around 8pm central standard time
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: Thunder Laser Question for Power on Mars 90 120v 100W - Lone Star Laser Co.

Post by Ben »

Hi Lonestarlaserco,
the instruction is as follow:
1.please check if you turn on the laser switch?
2.please check the power wire if it is loose?
3.please check if the fuse of the laser power supply is smelt?
Looking forware to hear from you.
Attachments
fuse.png
fuse.png (1.13 MiB) Viewed 3250 times
Post Reply