Poor quality photo engraving

Discuss Laser Control Softwares here!

Moderator: baker

futrelis
Posts: 14
Joined: Sat Jul 22, 2017 12:56 am

Re: Poor quality photo engraving

Post by futrelis »

upload the source photo..
Mine laser has a lot better quallity but not good yet
mine engraves ok at 300mm/sec 33% power and it is 50w
look these
ruida+glass
https://www.youtube.com/watch?v=QD7A8XrRSC4
perhaps galvo
https://www.youtube.com/watch?v=jk6n1kB43YE
closeracing
Posts: 22
Joined: Sat Jul 08, 2017 1:38 am

Re: Poor quality photo engraving

Post by closeracing »

Very nice engraving futrelis, and I do like the galvo, just not an option at this point.
China has finally agreed it is not the tube or alignment. As of yet, they do not know what the problem is. I tried to scan a square with the interval set at 4.5 (yes 4.5)mm to see individual lines. The machine will only scan a solid square, yet the beam is small enough that I can cut a tiny line 1/2" into a piece of acrylic that is 1"x1"x 3/16" so it is not an alignment or focus problem.
futrelis
Posts: 14
Joined: Sat Jul 22, 2017 12:56 am

Re: Poor quality photo engraving

Post by futrelis »

look this is with glass tube on black marble with chinese leetro controller
https://www.youtube.com/watch?v=egEbdSWzA0g

Also i have uploaded a file ready to engrave (not needed to pass through photograv) on black granite/marble.
Set speed 300mm/sec, optimized scan, scan interval 0.1
and power make your tests.
This file engraves ok.
After engraving apply paint if you engrave on granite.
Attachments
test-254dpi (ENG).zip
(162.24 KiB) Downloaded 263 times
closeracing
Posts: 22
Joined: Sat Jul 08, 2017 1:38 am

Re: Poor quality photo engraving

Post by closeracing »

Thank you, I will give it a try. What power do you recommend for a 60w?
futrelis
Posts: 14
Joined: Sat Jul 22, 2017 12:56 am

Re: Poor quality photo engraving

Post by futrelis »

low for sure not more 35% try 25-30% for start
Marcjaxl
Posts: 8
Joined: Wed Sep 20, 2017 3:56 pm

Poor quality photo engraving

Post by Marcjaxl »

After using the SE for 1 month the hand grip is starting to shred anyone else noticed this ,anybody got a remedy for this poor quality sponge .
I recommend trying [url=https://tradingrobotsite.wordpress.com/2017/08/eurusd-today-correction-in-long-term-to-fall.html]best forex trading system[/url] for profitable business
Post Reply