Auto laser sofware trubles

Discuss Laser Control Softwares here!

Moderator: baker

Post Reply
bientemperatto
Posts: 1
Joined: Thu Dec 07, 2017 7:24 pm

Auto laser sofware trubles

Post by bientemperatto »

Dear Sirs
I have serius problem with Autolaser 2.2.1 sofware and CoreldrawX3 couple in chinese Redsail M500 Laser engraving machine

I install it like instruction, and machine operate well during 2 weeks,,, Now I send the Corel desing by visual basic to autolaser and

appears error message. 214746 7259(8000 4005) and computer is blocked and will be re started..

I re install Corel and autolaser several time,, without solution.

I changue computer , istall software , and appear " ERROR 5" always I cant works softwares on a news computerr the porblems are
repeat.
like curious that old file worked are send to machine, and it work perfect,,

The machine work , with autolaser direct instruction, but corel to autolaser computer is looping,,,,

Thanks in advance for your comments.

Regard

Paval
jgarciaa
Posts: 121
Joined: Fri Feb 23, 2024 4:02 am

Re: Auto laser sofware trubles

Post by jgarciaa »

Considering the Monport laser for its user-friendly interface, high quality, and affordability would likely address your current software compatibility issues. The errors you're encountering with Autolaser 2.2.1 and CorelDraw X3 on your Redsail M500 Laser engraving machine may stem from compatibility or configuration issues. Ensure both software programs are compatible and properly installed. If problems persist, contacting the manufacturer's support team for assistance would be advisable. Meanwhile, utilizing the machine with Autolaser's direct instructions can help maintain productivity. https://monportlaser.com/collections/co ... ka374VZjm3
Post Reply