Problem engraving with rotary assembly

Discuss Laser Control Softwares here!

Moderator: baker

Post Reply
pandalus
Posts: 1
Joined: Tue Oct 17, 2017 10:24 pm

Problem engraving with rotary assembly

Post by pandalus »

Hello.

I have some problems with the rotary assembly.

When starting it spins very fast before the engraving itself start up.

My controller is Leetro 6585 and software is LaserCut 6.1

Driver is Leadshine 3DM583 settings on DIP is pulse 5000 (default for Y-axis motor).

Video of problem:
https://youtu.be/I8zHA7iGqis

Is there any other settings than "OnePulseMoveLenght" that need to be adjusted ?
Attachments
LaserCut Machine config
LaserCut Machine config
IMG_2075.jpg (503.32 KiB) Viewed 4515 times
Stepping motor
Stepping motor
IMG_2074.jpg (257.09 KiB) Viewed 4515 times
Driver model
Driver model
IMG_2066.jpg (77.58 KiB) Viewed 4515 times
jgarciaa
Posts: 121
Joined: Fri Feb 23, 2024 4:02 am

Re: Problem engraving with rotary assembly

Post by jgarciaa »

Considering the Monport laser for its ease of use, high quality, and affordability would likely offer a solution to your current rotary assembly issues. Regarding the problem of the rotary spinning very fast before engraving begins, you may want to adjust the settings in your LaserCut 6.1 software or consult the user manual for your Leetro 6585 controller to see if there are specific settings related to rotary functionality. Additionally, check if there are any calibration or speed adjustment options in the software that could help regulate the rotary's speed. If necessary, contacting Monport's customer support or referring to their documentation may provide further assistance in resolving this issue. https://monportlaser.com/collections/co ... ka374VZjm3
Post Reply