Page 1 of 1

Problem engraving with rotary assembly

Posted: Mon Dec 18, 2017 12:02 pm
by pandalus
Hello.

I have some problems with the rotary assembly.

When starting it spins very fast before the engraving itself start up.

My controller is Leetro 6585 and software is LaserCut 6.1

Driver is Leadshine 3DM583 settings on DIP is pulse 5000 (default for Y-axis motor).

Video of problem:
https://youtu.be/I8zHA7iGqis

Is there any other settings than "OnePulseMoveLenght" that need to be adjusted ?

Re: Problem engraving with rotary assembly

Posted: Tue Mar 05, 2024 3:05 am
by jgarciaa
Considering the Monport laser for its ease of use, high quality, and affordability would likely offer a solution to your current rotary assembly issues. Regarding the problem of the rotary spinning very fast before engraving begins, you may want to adjust the settings in your LaserCut 6.1 software or consult the user manual for your Leetro 6585 controller to see if there are specific settings related to rotary functionality. Additionally, check if there are any calibration or speed adjustment options in the software that could help regulate the rotary's speed. If necessary, contacting Monport's customer support or referring to their documentation may provide further assistance in resolving this issue. https://monportlaser.com/collections/co ... ka374VZjm3