X and Y axis problem. DOES NOT MATCH THE ACTUAL LASER HEAD

Discuss Laser Control Softwares here!

Moderator: baker

Post Reply
tonylgn
Posts: 1
Joined: Mon Jan 08, 2018 6:10 am

X and Y axis problem. DOES NOT MATCH THE ACTUAL LASER HEAD

Post by tonylgn » Mon Jan 08, 2018 6:17 am

I turned on the laser 100w 60x90 and the head keeps moving to parking position and hit very hard.
Both of sensors seems to work properly.
I checked on the controller 644xg and the values of x & y are 10000 each istead of 0,0 on the parking position.
I unscrew the axis and manually send th econtroller to 0,0 value. After turn off and on the machine the problem remain.
Also I tried to reset the cotnroller but nothing.
Anyone?

cargom
Posts: 4
Joined: Thu Apr 19, 2018 7:56 am

Re: X and Y axis problem. DOES NOT MATCH THE ACTUAL LASER HEAD

Post by cargom » Thu Apr 19, 2018 10:30 am

Hi did you find the awnser to the X Y on 10000

Ben
Posts: 89
Joined: Tue May 24, 2016 9:06 am

Re: X and Y axis problem. DOES NOT MATCH THE ACTUAL LASER HEAD

Post by Ben » Fri Apr 20, 2018 2:13 am

I think it should be the problem of limit switch.
It seems the limit switch doesn't work at all.
The laser head keeps moving to the park position,it should stop when trigger the limit switch.
Please make sure the X and Y axis limit switch are both working well.

Post Reply