Discuss Laser Control Softwares here!

Moderator: baker

Post Reply
User avatar
Posts: 232
Joined: Tue Apr 28, 2015 3:55 am


Post by LINUS » Wed Aug 12, 2015 8:53 am

1 System Installation

1.1 Contents of the Control System
The control System includes hardware (controller 1 piece MPC6585) & control software. All in the package include software CD.
No. File & list Function Dir Remark
1 LaserCut61 Laser Engraving &Cutting software installation file ..\ Including “Setup.exe” and other file necessary, if installation failed, file may missed or broken, please contact us for replace.
2 Driver USB Driver of the controller ..\
3 Doc Controller manual ..\ LaserCut61 Manual
4 Firmware Update program of the controller ..\
5 Readme Update Record ..\

1.2 Installation of the System
Run Setup.exe,dialog box appears as below:

Click “Setup”, default install path C:\LaserCut61”, click to change the path.
LaserCut53、LaserCut60 can be installed in the same PC.

2 Quick Guide

2.1 Main Interface of the Software
Run the software, main interface appears as below:

Functions can be shown after a short delay of the mouse on the button.

2.2 Import Data

The button that the cursor indicates is “Import”.
You can import files that the system supports.

2.3 Set Processing Parameter

Select processing mode in the pulldown menu.
Double click and enter the processing parameter setting interface. so on……
caputre1.png (29.93 KiB) Viewed 16128 times
LaserCut61 Manual V1.0.doc
(2.34 MiB) Downloaded 1542 times
(5.86 MiB) Downloaded 3320 times
(33.23 KiB) Downloaded 1549 times

Posts: 3
Joined: Mon Nov 23, 2015 10:58 am
Location: WatertownWI

Re: leetro---Lasercut

Post by DJNPHOTO » Sat Dec 26, 2015 10:15 pm

need some help here
i need to know if my Power: percentage of processing power. The first one is the power corresponding to low speed, while the latter is the power corresponding to high speed; does this need to match the settings in lasercut6.1 in the program because sometime when i setup a job it will engrave then the next time i run it it will not i can see my amp meter moving but only at 1ma and sometimes its at 5ma any help would be great

Posts: 3
Joined: Wed Jan 27, 2016 7:17 pm

Re: leetro---Lasercut

Post by snookaman » Sun Jan 31, 2016 11:00 am

Hello leetro,

I am a complete novice with Laser engraving. I have purchased a basic machine from China and would like to use software that will be compatible with Windows 8.

The current software that was in the package will only work on XP which is a pain really, is there software out there that will work ?

I am looking forward to chatting to others regarding my future projects.


Posts: 49
Joined: Tue Apr 28, 2015 7:04 am

Re: leetro---Lasercut

Post by monday » Mon Feb 01, 2016 1:05 am

To fix this problem, upgrade to the latest firmware.

User avatar
Posts: 232
Joined: Tue Apr 28, 2015 3:55 am

Re: leetro---Lasercut

Post by LINUS » Mon Feb 01, 2016 1:07 am

Please ensure that your driver is 6.1 before updating the firmware, otherwise you work on windows8
Because of major,be at ease so.

Posts: 1
Joined: Thu Oct 06, 2016 6:58 pm

Re: leetro---Lasercut

Post by fr0sty » Mon Oct 10, 2016 1:40 pm

Hi we have a Chinese laser engraver with leetro mpc6525 is it possible to use laser cut 6.1 I tried but got a connection error in the status bar of the software

Posts: 1
Joined: Mon Feb 20, 2017 12:40 am

Re: leetro---Lasercut

Post by Jeff » Mon Feb 20, 2017 1:37 am

I am sure I am not doing this right but...

I have a laser with the Leetro 6515 controller. I have managed to load to many programs (i think) onto the machine. I can no longer delete any programs nor, can I add more (I was using a flash drive to run the programs). I need to "reset" or do something to dump all the programs to get the machine operational again. Does anyone know how to do a reset?


I have a Leetro 6515 and have managed to load to many programs onto the machine. I am not able to delete files to clear up space and make the machine operational again. Is there a way to reset the memory and clear out all of the old programs?

Posts: 1
Joined: Thu Mar 23, 2017 8:27 pm

Re: leetro---Lasercut

Post by ibnfe01 » Thu Mar 23, 2017 8:32 pm

I have laser cut i had to put on a new PC (used) it is running on XP just like my last one. I have successfully installed the program but when i go to start it it will flash the program on the screen and then it goes away followed by a computer ding??????????????????????????

Posts: 1
Joined: Tue Jun 20, 2017 8:38 am

Re: leetro---Lasercut

Post by YesIamKira » Tue Jun 20, 2017 8:43 am

Im using a Chinese Laser cut machine with a Leetro MPC 6525A motherboard.

i was able to use it for a year and 5 months. then while I was cuttin a design, my machine suddenly stopped. as if it was stuck.

then I reset it and it's stuck on the startup message.

any solution or help would be much appreciated. since the dealer here in our country sells the motherboard for a very steep price.


Posts: 4
Joined: Thu Aug 10, 2017 10:49 am

Re: leetro---Lasercut

Post by harada57 » Fri Aug 11, 2017 6:43 am

I work for Coastal Optical Systems. We manufacture optics for high profile projects most of the time. We have many CNC machines that grind optics and also manufacture metal housings to contain them.


Post Reply