leetro---Lasercut
Posted: Wed Aug 12, 2015 8:53 am
1 System Installation
1.1 Contents of the Control System
The control System includes hardware (controller 1 piece MPC6585) & control software. All in the package include software CD.
No. File & list Function Dir Remark
1 LaserCut61 Laser Engraving &Cutting software installation file ..\ Including “Setup.exe” and other file necessary, if installation failed, file may missed or broken, please contact us for replace.
2 Driver USB Driver of the controller ..\
3 Doc Controller manual ..\ LaserCut61 Manual
4 Firmware Update program of the controller ..\
5 Readme Update Record ..\
1.2 Installation of the System
Run Setup.exe,dialog box appears as below:
Click “Setup”, default install path C:\LaserCut61”, click to change the path.
LaserCut53、LaserCut60 can be installed in the same PC.
2 Quick Guide
2.1 Main Interface of the Software
Run the software, main interface appears as below:
Functions can be shown after a short delay of the mouse on the button.
2.2 Import Data
The button that the cursor indicates is “Import”.
You can import files that the system supports.
2.3 Set Processing Parameter
Select processing mode in the pulldown menu.
Double click and enter the processing parameter setting interface. so on…… Download:
1.1 Contents of the Control System
The control System includes hardware (controller 1 piece MPC6585) & control software. All in the package include software CD.
No. File & list Function Dir Remark
1 LaserCut61 Laser Engraving &Cutting software installation file ..\ Including “Setup.exe” and other file necessary, if installation failed, file may missed or broken, please contact us for replace.
2 Driver USB Driver of the controller ..\
3 Doc Controller manual ..\ LaserCut61 Manual
4 Firmware Update program of the controller ..\
5 Readme Update Record ..\
1.2 Installation of the System
Run Setup.exe,dialog box appears as below:
Click “Setup”, default install path C:\LaserCut61”, click to change the path.
LaserCut53、LaserCut60 can be installed in the same PC.
2 Quick Guide
2.1 Main Interface of the Software
Run the software, main interface appears as below:
Functions can be shown after a short delay of the mouse on the button.
2.2 Import Data
The button that the cursor indicates is “Import”.
You can import files that the system supports.
2.3 Set Processing Parameter
Select processing mode in the pulldown menu.
Double click and enter the processing parameter setting interface. so on…… Download: