Please reference to GB7247.1-2001 and take some safety protection measures.
The following should be executed：
Operation persons should wear protection glasses。
Connection to the earth. A valid connection to earth should be done and the resistance should be less than 1 ohm.
Please do not try to disassemble parts of the LFS. Or LFS will be fault
Laser beam and the LFS sensor are integrated design. When the LFS is working, please do not touch the sensor. Or there are damage to your body
When cutting metal, please notice the reflect laser beams from the metal surface. Some protection measure should be taken to avoid the body to be damaged.
Keep the sensor and nozzle clean. Avoid the cooling water flow into it. If water and other conductor enter the sensor, the sensor will be fault. The laser power and other controllers should conform with the EMC standard and should be connect to the earth reliably.
- contents3.png (13.19 KiB) Viewed 13016 times
