New air pump and electro valve
Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan
Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
- andaluzia1973
- Posts: 22
- Joined: Wed Jul 05, 2017 11:50 am
New air pump and electro valve
The Outstanding air compressor that came with the nova 63 machine a capacity of 60 liters /min and we need to purchase an electro valve. What should be the characteristics of the electro valve to accommodate efficiently the new air pump? The valve that we have already purchased is not good (1/4" 4 psi).
Re: New air pump and electro valve
Yes,the machine need to install an electro valve if using a outstanding air compressor.
But after connect to electro valve,if you want to use the air pump again please let the air tube do not go through the valve,because the air flow of air pump is not enough and cannot go through it.
But after connect to electro valve,if you want to use the air pump again please let the air tube do not go through the valve,because the air flow of air pump is not enough and cannot go through it.