Pulse button

We provide online after sales support here, very quick reply.

Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan

Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
Post Reply
User avatar
andaluzia1973
Posts: 22
Joined: Wed Jul 05, 2017 11:50 am

Pulse button

Post by andaluzia1973 »

Hi Ben,

I have to cut a cardboard only half of its thickness and I was playing around and get very good results using the pulse button.
In few passes the cardboard was half cut and the cuts were extremely clean, no trace of burn at all.

# Is it OK to use the pulse function for this type of job? ( I have to half cut cardboard for about 100 packaging boxes)

# is there a way to set this procedure from rdworks software?

Thank you
Anda
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: Pulse button

Post by Ben »

Hi Anda,

Sorry for my late reply,i just came back from exhibition in bulgaria.
For cutting by pulse button,did you just move the laser head and press the pulse button at the same time.
Let me know how did you use pulse function to cut?
We don't recommend to use it to cut,since it have no air assist to cool the focus lens and material when press the pulse button.
Post Reply