Page 1 of 1

Problem Mars 1290

Posted: Thu Mar 29, 2018 10:43 pm
by Igor
Hello,

I have a problem with my machine. When the head is returning to the default position, it begins to be tearing/tugging, or sometimes even stops.
After this happens, the message line appears on the screen: "Hard Limit Prot. Please ESC".
Nothing helped fix this problem, like restarting the machine etc.

The video of the problem is below.

https://streamable.com/340lg

Thank you!

Re: Problem Mars 1290

Posted: Sat Mar 31, 2018 3:47 pm
by Wayne
Have you reset Datum, it can do this if the controller is confused about the X=0 and y=0 position

does the controller show the correct size of the bed ie 1200x900

Re: Problem Mars 1290

Posted: Sat Apr 07, 2018 2:38 am
by Ben
Hi Igor,

It seems that the limit switch is not working well.
Please check the Diagnoses from the LCD panel,see below.
4.71.png
4.71.png (2.81 MiB) Viewed 3158 times
XLimit- is for X limit switch,YLimit- is for Y limit switch.please check the state are they working well.
Red: X limit switch is on.
Grey: X limit switch is off.

Re: Problem Mars 1290

Posted: Mon Apr 16, 2018 8:37 pm
by Igor
Hello.
I would like to thank everyone for help, the issue is fixed.
The problem was a broken cable for limit switch. Maybe it would be better to use more flexible cable.

But I have another question. During cutting of a square 60x60 cm, the actual dimension/result is 59,7x60,3. How can fix this?

Thanks again!