standard laser head vs HR head

We provide online after sales support here, very quick reply.

Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan

Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
Post Reply
User avatar
andaluzia1973
Posts: 22
Joined: Wed Jul 05, 2017 11:50 am

standard laser head vs HR head

Post by andaluzia1973 »

Hi

I was running exactly the same file with:

standard laser head - focal distance 6mm
HR head - focal distance 4 mm
I was hoping to get even better results with HR head..... but I didn't.
What settings should I chnage?

Thank you
Anda
Attachments
35812678_10156075356438387_2931402521974931456_n.jpg
35812678_10156075356438387_2931402521974931456_n.jpg (91.54 KiB) Viewed 8077 times
35887067_10156075356423387_9171004922248822784_n.jpg
35887067_10156075356423387_9171004922248822784_n.jpg (148.73 KiB) Viewed 8077 times
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: standard laser head vs HR head

Post by Ben »

Hi Anda,

I wonder if you use HR head to cut material.
Please noted,the HR head is generally used only for engraving,if you want to cut,you can only cut something very thin,like paper.
Post Reply