Page 1 of 1

Honeycomb materials and cleaning

Posted: Thu Aug 02, 2018 12:53 pm
by tumim
Hello,

1. Can you please provide information about what materials/metals used for honeycomb table.
I have used magnets for testing and may guess that sells of honeycomb made from stainless steel and the edges of honeycomb table made from aluminum.

2. Can you please advice how I can clean my 1600*1000 honeycomb table from plywood and acrylic residue. May I soak my table with some thing for a couple hours and than wash the table with water.
This cleaning product should be natural for aluminum/stainless steel.

Thanks in advance.

Re: Honeycomb materials and cleaning

Posted: Fri Aug 03, 2018 6:01 am
by Ben
Hello,

To answer your quesitons:
1.For the honeycomb table,it made from galvanized iron and yes the edges of honeycomb table made from aluminum.
2.To clean the plywood and acrylic residue,we generally use vacuum clean to remove them.
you can refer to below link.
http://support.epiloglaser.com/article/ ... tting-Grid

Re: Honeycomb materials and cleaning

Posted: Fri Aug 03, 2018 8:18 am
by tumim
Hello,

Cant find any information about "vacuum clean" using your link.
Can you please add more links about this "vacuum clean" procedure or explain please.
Thanks in advance.