Nolan,
We finally got our laser machine. We setup the machine per your instructions and
keep blowing fuses. No I pulled the fuse out of the machine and it looks like a 10Amp 250V fast
blowing fuse. Your manual for the 130 says it should be a 15Amp 250Volt fuse which is
correct. Note that the manual says that it should be 15Amp fuse for 80 watt laser and ours
is over that. Please tell me what I should use.
Renaldo
The fuse is 5mm diameter round and 20mm glass fuse.
Please respond quickly because we will be using our machine monday morning.
We finally got our laser machine
Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan
Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
-
- Posts: 115
- Joined: Fri Jun 05, 2015 8:16 am
Re: We finally got our laser machine
Hello Renaldo
good day,for the fuse,please use 15Amp,thank you!
Best Regards
good day,for the fuse,please use 15Amp,thank you!
Best Regards
- Renaldo_Neely
- Posts: 6
- Joined: Tue May 19, 2015 2:42 am
Re: We finally got our laser machine
Is that a slow blow fuse or fast blow fuse?Thunder Laser Tech 1 wrote:Hello Renaldo
good day,for the fuse,please use 15Amp,thank you!
Best Regards
-
- Posts: 115
- Joined: Fri Jun 05, 2015 8:16 am
Re: We finally got our laser machine
Hello Renaldo
it is a slow blow fuse,please noted,thank you!
Best Regards
it is a slow blow fuse,please noted,thank you!
Best Regards
- Renaldo_Neely
- Posts: 6
- Joined: Tue May 19, 2015 2:42 am
Another Question:
We have been having problems loading a file from Udisk. Is Udisk the Laser Cutter's
name for USB drive? What kind of file is the Laser Cutter looking for? Does it read .dxf
file or do you have to run everything through RD-Works? I am probably doing this wrong
thing. Can you help.
I read the manual but still I'm a little confused.
Renaldo
name for USB drive? What kind of file is the Laser Cutter looking for? Does it read .dxf
file or do you have to run everything through RD-Works? I am probably doing this wrong
thing. Can you help.
I read the manual but still I'm a little confused.
Renaldo
-
- Posts: 115
- Joined: Fri Jun 05, 2015 8:16 am
Re: Another Question:
Hello Renaldo,Renaldo_Neely wrote:We have been having problems loading a file from Udisk. Is Udisk the Laser Cutter's
name for USB drive? What kind of file is the Laser Cutter looking for? Does it read .dxf
file or do you have to run everything through RD-Works? I am probably doing this wrong
thing. Can you help.
I read the manual but still I'm a little confused.
Renaldo
Sorry for the late reply.
About the Udisk, please click "SaveToUFile", then save the file to your Udisk, then you can select the file from the panel on our machine.
any question, ask me again. keep in touch.
Best Regards