Needing a laser

General knowledge about laser here.

Moderator: baker

Post Reply
Posts: 1
Joined: Sat Aug 01, 2020 11:18 am

Needing a laser

Post by chrisp » Sat Aug 01, 2020 7:16 pm

Im looking for a laser capable of cutting 5mm MDF or Plywood for clock making. Can anyone recommend the ideal machine for me? It needs to be able to cut a minimum area of 30x30cm and ideally be a good price. Hopefully someone here can help. Chris

Posts: 3
Joined: Fri Sep 18, 2020 4:10 pm

Re: Needing a laser

Post by Mervinlee1235a » Fri Oct 30, 2020 1:13 pm

Hi Chris, thank you very much for asking the help. This laser engraving forum is a great place to get helped and also provide help to other members. This is really a technical family to stay. I think heatsign can be a great source of help regarding the issue. Laser marking technology is more widely used in the printing field in recent years and laser marking solutions can be applied to several materials, for instance, plastic and rubber, metal and silicon chips. In comparison to the traditional mechanical engraving, chemical corrosion, network printing and oil ink printing, laser marking is characterized by low cost and high flexibility and can be controlled by a computer system. The mark produced on the workpiece surface by laser is permanent. You can check out here to learn more. I will be Highly pleased if you find it helpful.

Post Reply