Page 1 of 1

Please Help No Power to machine

Posted: Tue Mar 07, 2017 7:55 pm
by powl4evr
I have a kehui 100w laser engraver. Last week it just shut down. It appears that there is no power to the machine. There is power to the outlet, tried a different power cable, checked switches and emergency shut off switch, all appear good. Ordered a new power supply and installed it today, still nothing.
Please does anyone have any ideas why this is happening.

Thank you,
Shawn

Re: Please Help No Power to machine

Posted: Thu Mar 09, 2017 12:14 am
by powl4evr
Ha, stupid me. Found a very hidden fuse. Problem solved

Re: Please Help No Power to machine

Posted: Thu Mar 09, 2017 1:33 am
by LINUS
bless you

Re: Please Help No Power to machine

Posted: Fri Mar 31, 2017 9:23 pm
by Angelasundy
Where is the hidden fuse this is the same issue our power works everywhere but the control panel please help

Re: Please Help No Power to machine

Posted: Sat Apr 01, 2017 3:47 am
by LINUS
hidden fuse in connection socket at the rear side