Some experiments with lasers

General knowledge about laser here.

Moderator: baker

Post Reply
gf_endurance
Posts: 1
Joined: Fri Mar 10, 2017 11:58 am

Some experiments with lasers

Post by gf_endurance »

For a while we were afraid to do a laser engraving on aluminum, we knew that only
powerful CO2 lasers 80W+ could do that and also not all.
Then we decided, why don’t we paint an aluminum and try to make this experiment and
we did it.
It is absolutely amazing… https://www.youtube.com/watch?v=SjQYrdnWJcs
Many DIY suppliers and producers of diode lasers say that their lasers do not engrave
on metal, for some reasons our laser can.
We used a DIY machine for that. By the way if you purchase them from Ali and you
need a video tutorial how to assemble it you may like ours
https://www.youtube.com/watch?v=PiqIf3fK1Fk
Or if you need to know how to assemble MakeBlock 2.0 XY plotter you are also
welcome to watch this guidance https://www.youtube.com/watch?v=bDlq0_BuEyM
Post Reply