Rotary attachment

General knowledge about laser here.

Moderator: baker

Post Reply
powl4evr
Posts: 4
Joined: Tue Mar 07, 2017 6:41 pm

Rotary attachment

Post by powl4evr »

Hi,
I have a 100w chinese laser engraver and when i connect the rotary the "Y" axis does not move and the red light activates on the stepper driver. I have two different rotary attachments, regular and irregular. This happens with both.
Any ideas what might be causing this problem.

Thanks,
Shawn
User avatar
LINUS
Webmaster
Posts: 263
Joined: Tue Apr 28, 2015 3:55 am

Re: Rotary attachment

Post by LINUS »

Do you turn on the Rotary switch?and cirde pulse is right?
Because of major,be at ease so.
Cherry Stylecnc
Posts: 44
Joined: Mon Sep 04, 2017 7:44 am
Contact:

Re: Rotary attachment

Post by Cherry Stylecnc »

Dear,

When you need attach rotary, you can attach it on X axis or Y axis, when you connect on Y axis, then the rotary will replace the Y axis to move , Y axis don't need move.

Best Regards,
Cherry
Post Reply