Page 1 of 1

Rotary attachment

Posted: Fri Apr 21, 2017 4:54 pm
by powl4evr
Hi,
I have a 100w chinese laser engraver and when i connect the rotary the "Y" axis does not move and the red light activates on the stepper driver. I have two different rotary attachments, regular and irregular. This happens with both.
Any ideas what might be causing this problem.

Thanks,
Shawn

Re: Rotary attachment

Posted: Tue Apr 25, 2017 1:09 am
by LINUS
Do you turn on the Rotary switch?and cirde pulse is right?

Re: Rotary attachment

Posted: Sat Mar 24, 2018 7:05 am
by Cherry Stylecnc
Dear,

When you need attach rotary, you can attach it on X axis or Y axis, when you connect on Y axis, then the rotary will replace the Y axis to move , Y axis don't need move.

Best Regards,
Cherry