But there are a few types you should know when you use the CNC laser marking machine

General knowledge about laser here.

Moderator: baker

Post Reply
Therese Guo
Posts: 5
Joined: Sat Mar 10, 2018 9:01 am

But there are a few types you should know when you use the CNC laser marking machine

Post by Therese Guo » Sat Mar 10, 2018 11:23 am

But there are a few types you should know when you use the CNC laser marking machine:

1.When you using laser marking machine, try not to idling the machine, when you adjust technical parameters, it must be sure to operate according to actual work.
2.In the process of work, if the machine has problems, you must turn off the power in time, and check or repair after the mirror stop working.
3.It is best to follow the switch sequence to prevent damage from the wrong operation.
4.Whether it is water cooling or air cooling, it's best to use it in the right environment. It is not only beneficial to the operation of the machine, but also help to prolong the working life of the machine.

Sales team should not only recommend to you the right machine according to your work, and their professional team of laser machine engineers will solve the problems of the machine in time, ensure that our machine can finish the work timely and efficient.



Original link:www.stylecnc.com

Post Reply