How to use a laser engraving machine?

General knowledge about laser here.

Moderator: baker

Post Reply
NickStyle
Posts: 11
Joined: Sun Apr 08, 2018 4:08 am

How to use a laser engraving machine?

Post by NickStyle »

Are you looking for a laser engraving machine that can engrave and cut wood, acrylic, plastic, marble, etc.? You can choose a STYLECNC® laser engraving machine https://www.stylecnc.com/laser-engraving-machine/to etch intricate designs in all of these materials and many more.

How to install a laser engraving machine?
How to install a laser engraving machine correctly? This is a key point, laser engraving machine will go well only when you install the machine correctly. Don't worry, this video will help you to know the process of how to correctly install a laser engraving machine.
https://www.youtube.com/watch?v=SoSV7xiBT70


Laser engraving machine basics:
Laser Source: CO2 laser source, 30W-150W

Laser Engraving Materials: Wood, acrylic, plastic, glass, leather, corian, fabric, coated metals, anodized aluminum, ceramics, mylar, pressboard and more.

Laser Cutting Materials: Wood, acrylic, plastic, delrin, cloth, leather, melamine, paper, rubber, veneer, cork and more.

The laser uses a beam of light as the engraving tool, so no part of the machinery actually touches the material being engraved.

You don't need a special system to hold down your engraving material, and there are less consumables with a STYLECNC® laser engraving machine.

Laser engraving produces a permanent, crisp, highly detailed mark, engraving images at up to 1200 dots per inch.

The engraving quality is unmatched for reproducing graphics.



Lasers provide an extremely fast way to customize your products. With a laser system, if you want to engrave multiple pieces, you can quickly create a jig to hold the products in place, put the jig in the laser, and engrave as many pieces as fit in the engraving table.

We manufacture four different product lines of laser engraver systems to meet your needs. From our desktop Laser Series to our top-of-the-line laser engraving systems, you'll find the right laser engraver to etch your products.

How to use?

Attached to your computer just like a printer, the laser engraving machine will cut designs you create in most graphic software programs. Set up your page size to the size of the piece you are engraving, create your image, and print it to the laser - it will even cut many of the materials with the same system!

The best way to describe how our lasers work is to compare the system to your printer. Using similar technology, we take the images you typically print to paper, but instead we fire a CO2 laser beam that engraves and cuts your design on a wide variety of materials.

How to make an Image to laser engraving?

1. Start by scanning or importing your image.

2. Import your image into CorelDRAW or a similar design program. Set your page size to the size of the piece you are engraving.

3. Convert the photo to grayscale. Since we are engraving on anodized aluminum for this example, we have inverted the image.

4. Configure the laser's speed and power, using the suggested settings in the owner's manual, then send the print job to the laser system for engraving.

5. Complete by choosing your print job from the laser menu and pushing the go button for engraving to begin.

6. Your work is done! With these few, simple steps, you have created a stunning engraving that will last a lifetime!

What is the highest resolution engraving a STYLECNC® laser engraving machine can produce?

A STYLECNC® laser engraving machine https://www.stylecnc.com/laser-engraving-machine/can engrave up to 1200 dots per inch, which allows you to achieve the highest quality engraving on the market. Even at the highest speeds, our lasers will etch with the highest precision.

Why are your laser engraving systems better than a glass laser tube?

By using laser tubes that are made of metal with ceramic components, we are able to fire our lasers at a much faster rate than glass laser tubes, which provide us with much higher quality when engraving. Also our laser tubes are all air-cooled - no water cooling required.

Where can I get more information or set up a demonstration?

Fill out the form on this page and we'll send you laser engraved and cut samples, a dvd demo and a full product line brochure that will show you what you can do with a laser engraving machine.

OR welcome to visit more informations on https://www.stylecnc.com/laser-engraving-machine/
xuanbachk54
Posts: 1
Joined: Wed May 16, 2018 4:38 am

Re: How to use a laser engraving machine?

Post by xuanbachk54 »

Thank you your infomation. it's really helpfuly
https://maykhac.vn/
Post Reply