Masking layer

General knowledge about laser here.

Moderator: baker

Post Reply
CJ000000
Posts: 1
Joined: Sat Sep 26, 2020 2:51 pm

Masking layer

Post by CJ000000 »

I'm wondering if anyone could advise me on the use of a masking layer. Basically, I want to coat my base material with a removable layer - non-binding paint, wax or maybe wd40. Then use an engraver like an Ortur 20W to selectively remove from that masking layer. I then want to spray paint the item. And wash it (after drying) - hopefully just leaving me with the engraved area painted.

I'd be interested to know whether this would be practical, and if so - what would be a good choice for the masking layer.

What I really need is a UV sign printer. But I can't justify the high cost.
applop
Posts: 1
Joined: Sun Jan 10, 2021 9:52 pm

Re: Masking layer

Post by applop »

Hi - I'm sort of new here on the forum

But - what I would do when wanting to do what you describe, is to use a masking tape/foil like in the video
https://www.youtube.com/watch?v=GXQ450k ... otecCanada

- Applop
Post Reply