Hey guys,
I need your input. Want to build a CNC laser for ablating paint on metal pipes. It would be used only for that purpose.
The pipes are of diameters from 250mm to 600mm. Their length is from 100 to 350mm. And weight from 0.5kg to 5kg
Ablating paint like shown here.
Here's a basic drawing of the idea for the machine:
First of all, would this solution work?
Then, any advices or guides would be highly appreciated!
Rotary laser machine
Moderator: baker
Re: Rotary laser machine
Your idea may be right,but you should use Rotary Axis
Because of major,be at ease so.
Re: Rotary laser machine
You mean rotary table or the solution with a lathe chuck?
Chuck would have to be extremely large and heavy (600mm diameter).
Chuck would have to be extremely large and heavy (600mm diameter).
Re: Rotary laser machine
A lathe chuck?The speed of the laser machine may be regulated to pace the lathe chuck
Because of major,be at ease so.
-
- Posts: 8
- Joined: Sun Jun 04, 2017 9:11 am
Re: Rotary laser machine
Well, this our solution:
NCSK marking machine
www.chinancsk.com
677@63177.com
www.chinancsk.com
677@63177.com