INTRODUCE YOURSELF
Moderator: baker
-
- Posts: 1
- Joined: Tue Jun 13, 2017 10:50 am
Re: INTRODUCE YOURSELF
Hello to everyone, I am brand new to laser cutting and am just about to purchase a secondhand G.Weike LG 500 (desk) laser cutter engraving machine 60W. I think it is a low use machine and we are in the final negotiations. I hope to pick it up this week. When I get it I will find out how complete it is and no doubt be coming back here asking for advice. My interest is the design and building of my own clocks and kinetic art. I have a lathe, milling machine and a 3d printer. I am very much looking forward to cutting parts out of acrylic. (including gears)
I have been reading some of the posts on the forums and am very grateful that so much good advice is on offer. I will let you know how I am getting on as soon as I fire up my new device. (assuming I get it!)
Anyways, thank you for letting me come on board
I have been reading some of the posts on the forums and am very grateful that so much good advice is on offer. I will let you know how I am getting on as soon as I fire up my new device. (assuming I get it!)
Anyways, thank you for letting me come on board
Re: INTRODUCE YOURSELF
Hello,
I'm a novice woodworker from Upstate NY. I bought a laser engraver to expand the options we have. We have been asked to make toys for VA Family Center. We hope we can do some great things with laser. I look forward to share some great information and idea here
I'm a novice woodworker from Upstate NY. I bought a laser engraver to expand the options we have. We have been asked to make toys for VA Family Center. We hope we can do some great things with laser. I look forward to share some great information and idea here
-
- Posts: 1
- Joined: Mon Jun 26, 2017 2:33 am
Re: INTRODUCE YOURSELF
Hi all, I'm in Austin Texas and have an 80 watt CO2 laser and 2 30 watt fiber galvos. I do all walk in/call in engraving & cutting. I run Corel X7, Job Control JCX, and Ezcad on the fibers. Hopefully I can help out or learn a thing or two. Neville.
-
- Posts: 2
- Joined: Mon Jun 26, 2017 2:38 pm
Re: INTRODUCE YOURSELF
Hello all,
If you're looking for a top quality laser machine then Adwin Laser is the place to go.
We offer both Fiber and CO2 laser machines at very competitive prices, and can compete with the quality of the well known branded laser companies in the market.
All machines come with built in software which is very simple to navigate around, where you can choose from a number of different fonts. Barcodes and QR codes are also available to choose from, which can be lasered onto the material required.
Our laser machines come with training by a member of staff free of charge for a limited time only, so grab while you can!
Our knowledgeable staff can help and guide you to purchasing the correct machine to suit your personal requirements, whether that be engraving, marking or cutting all different types of materials.
We are based in West Bromwich in West Midlands, England, UK.
Our website is http://www.adwinlaser.co.uk.
You can take a look at our Social Media pages too;
http://www.facebook.com/adwinlaser/
http://www.twitter.com/adwinlaser/
http://www.linkedin.com/company/adwinlaser/
If you require anymore information, please contact:
luke@adwin.co.uk - 0121 521 3408
Thank you.
If you're looking for a top quality laser machine then Adwin Laser is the place to go.
We offer both Fiber and CO2 laser machines at very competitive prices, and can compete with the quality of the well known branded laser companies in the market.
All machines come with built in software which is very simple to navigate around, where you can choose from a number of different fonts. Barcodes and QR codes are also available to choose from, which can be lasered onto the material required.
Our laser machines come with training by a member of staff free of charge for a limited time only, so grab while you can!
Our knowledgeable staff can help and guide you to purchasing the correct machine to suit your personal requirements, whether that be engraving, marking or cutting all different types of materials.
We are based in West Bromwich in West Midlands, England, UK.
Our website is http://www.adwinlaser.co.uk.
You can take a look at our Social Media pages too;
http://www.facebook.com/adwinlaser/
http://www.twitter.com/adwinlaser/
http://www.linkedin.com/company/adwinlaser/
If you require anymore information, please contact:
luke@adwin.co.uk - 0121 521 3408
Thank you.
-
- Posts: 3
- Joined: Sat Jul 01, 2017 4:20 am
Re: INTRODUCE YOURSELF
Hello Everyone,
I am raja from India ......i am here to gain kNOWLEDGE.............
Dayananda Sagar College of Engineering admission
MS Ramaiah Institute of Technology admission
PES Institute of Technology admission
RV College of Engineering admission
I am raja from India ......i am here to gain kNOWLEDGE.............
Dayananda Sagar College of Engineering admission
MS Ramaiah Institute of Technology admission
PES Institute of Technology admission
RV College of Engineering admission
-
- Posts: 3
- Joined: Sat Jul 01, 2017 4:20 am
Re: INTRODUCE YOURSELF
Hello Everyone,
I am raja from India ......i am here to gain kNOWLEDGE.............
MS Ramaiah Institute of Technology admission
PES Institute of Technology admission
RV College of Engineering admission
I am raja from India ......i am here to gain kNOWLEDGE.............
MS Ramaiah Institute of Technology admission
PES Institute of Technology admission
RV College of Engineering admission
-
- Posts: 1
- Joined: Mon Jul 03, 2017 10:52 pm
Re: INTRODUCE YOURSELF
I am Paul
I have a K40 machine upgraded with LaserLight control panel and LaserCad V7.78.
I have used this machine to cut gears for wooden clocks that I build, both in wood and plastic.
Also use it to cut custom panels for various home projects.
Been using the machine for about a year, and with the upgrades I am very happy for my little projects.
I have a K40 machine upgraded with LaserLight control panel and LaserCad V7.78.
I have used this machine to cut gears for wooden clocks that I build, both in wood and plastic.
Also use it to cut custom panels for various home projects.
Been using the machine for about a year, and with the upgrades I am very happy for my little projects.
-
- Posts: 1
- Joined: Tue Jul 11, 2017 2:09 am
Re: INTRODUCE YOURSELF
Hello!
My name is Gerardo, Im from México and i have a chinese 100 w laser, I´ve been learning about 2 years ago, so I´m here to continue learning and sharing knowledge.
Regards!
My name is Gerardo, Im from México and i have a chinese 100 w laser, I´ve been learning about 2 years ago, so I´m here to continue learning and sharing knowledge.
Regards!
Re: INTRODUCE YOURSELF
Hey All,
My name is Ryan and I do custom laser engraving on guns. I'm currently working with an Epilog Fibermark 24 (30 watt) and a Laserstar 80 watt fiber as well. We mainly do engravings on metal although I have used a CO2 laser on wood, plastic, leather and more in the past. Looking forward to learning a thing or 3 in here.
Cheers,
Ryan
My name is Ryan and I do custom laser engraving on guns. I'm currently working with an Epilog Fibermark 24 (30 watt) and a Laserstar 80 watt fiber as well. We mainly do engravings on metal although I have used a CO2 laser on wood, plastic, leather and more in the past. Looking forward to learning a thing or 3 in here.
Cheers,
Ryan