Lines in engraving

Discuss Laser Control Softwares here!

Moderator: baker

Post Reply
closeracing
Posts: 22
Joined: Sat Jul 08, 2017 1:38 am

Lines in engraving

Post by closeracing »

Can anyone tell me how to get rid of these lines? I am now using Corel photo and RDworksv8. Resolution is 1500, frequency is 70 lines per inch,net graphic dithering. I've been struggling with image quality and would sincerely appreciate any and all helpful advice. Thank you!
FullSizeRender.jpg
FullSizeRender.jpg (141.88 KiB) Viewed 7102 times
FullSizeRender (2).jpg
FullSizeRender (2).jpg (86.5 KiB) Viewed 7102 times
futrelis
Posts: 14
Joined: Sat Jul 22, 2017 12:56 am

Re: Lines in engraving

Post by futrelis »

closeracing wrote:Can anyone tell me how to get rid of these lines? I am now using Corel photo and RDworksv8. Resolution is 1500, frequency is 70 lines per inch,net graphic dithering. I've been struggling with image quality and would sincerely appreciate any and all helpful advice. Thank you! FullSizeRender.jpgFullSizeRender (2).jpg
Interval must be equal to 25.4/DPI of your photo
For example for a 300dpi photo must be 0.0847.
Also not use net graphic use dot dithering.
closeracing
Posts: 22
Joined: Sat Jul 08, 2017 1:38 am

Re: Lines in engraving

Post by closeracing »

Interval must be equal to 25.4/DPI of your photo
For example for a 300dpi photo must be 0.0847.
Also not use net graphic use dot dithering.[/quote]

Thank you very much, I did not know that about interval settings
blondie123
Posts: 2
Joined: Sat Jul 08, 2017 5:22 pm

Re: Lines in engraving

Post by blondie123 »

We are having the same issue with our laser -- Can't get rid of the lines... HELP!! Please!
closeracing
Posts: 22
Joined: Sat Jul 08, 2017 1:38 am

Re: Lines in engraving

Post by closeracing »

Blondie123 are you using RDworks? If so you might try changing your cut and sweep parameters to the settings in these photos. It seems to be working for me.
user-sweep.png
user-sweep.png (14.71 KiB) Viewed 7040 times
user-cut.png
user-cut.png (15.03 KiB) Viewed 7040 times
closeracing
Posts: 22
Joined: Sat Jul 08, 2017 1:38 am

Re: Lines in engraving

Post by closeracing »

Also do not use net graphic for dithering. Use an outside program like photograv if you have it or try dot graphic in RDworks. Net graphic is responsible for the lines, improper sweep parameters are likely the cause of poor quality
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: Lines in engraving

Post by Ben »

Try to decrease the value of interval,general set from 0.06~0.08.
1239.png
1239.png (34.01 KiB) Viewed 7031 times
harada57
Posts: 4
Joined: Thu Aug 10, 2017 10:49 am

Re: Lines in engraving

Post by harada57 »

This is my first day on the forum and I though I would hello. I bought a micro mill I am converting to CNC and was told this is the place to be. I look forward to bugging you guys with novice questions.


สมัครบาคาร่า
Tommycuyhi
Posts: 7
Joined: Wed Sep 20, 2017 5:19 am

Lines in engraving

Post by Tommycuyhi »

Hi everyone ,

Does anyone know how I can detect Double lines in an TS model?

I guess SelDup or SelDupAll is not the wright way for TSshapes...?

Greetings,
Michel
I trust [url=https://tradingrobotsite.wordpress.com/2016/09/crashtrader.html]mt5 ea[/url] for successful business
Reidfjaiv
Posts: 3
Joined: Wed Sep 20, 2017 1:23 am

Lines in engraving

Post by Reidfjaiv »

Is there any way to remove the lines which correspond to margins, etc. from around text when in full page view?
My choice [url=https://tradingrobotsite.wordpress.com/2017/09/morgan-stanley-any-outcome-of-scottish-referendum.html]metatrader expert advisor[/url] for self-earnings
Post Reply